Table of Contents
Advertisement
Operation
Operation
T
urning on the Monitor
T
urning on the Monitor
Turning on the Monitor just after installation
1. Connect power cord correctly.
2. Press the
ON/OFF button on the Monitor. At this moment, the Monitor is switched to standby
mode. Press the INPUT SELECT button on the Monitor or press the POWER, INPUT SELECT
button on the remote control and then the Monitor will switch on.
Turning on the Monitor (power cord is still connected)
1. If the Monitor was turned off with the
• Press the
ON/OFF button on the Monitor to turn the Monitor on.
2. If the Monitor was turned off with the remote control and then the
• Press the
ON/OFF button on the Monitor and then press the INPUT SELECT button on the
Monitor or press the POWER, INPUT SELECT button on the remote control to turn the Monitor on.
Menu Language Selection
Menu Language Selection
- The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use
2. Press the
G
button and then use
G
3. Press the
button and then use
From this point on, the on-screen menus will be shown in the language of your choice.
4. Press the OK button to save.
ON/OFF button on the Monitor
button to select the SPECIAL menu.
D
E
/
button to select
D
E
/
button to select your desired language.
D
E
/
ON/OFF button on the Monitor
.
Operation
VIDEO
한국어
Language
G
English
Key lock
AUDIO
Español
ISM Method
Português
Low power
TIME
Français
Set ID
OSD Rotate
SPECIAL
SCREEN
TWIN
MENU Prev.
Owner's Manual 15
Advertisement
Table of Contents
