Table of Contents
Advertisement
Measure V.F.C
1.
2.
Connect the black test lead to the COM Terminal and
the redlead tothe
{ait
Terminal;
Turn the rotary to
{| ,longpress
'to
enter
V.F.C mode, the screen will show voltage when put
the test leads at the correct circuit.
Measure square wave
1.
Connect the black test lead to the COM Terminal and
the redlead tothe
%3!
Terminal;
. Turn
the rotary switch to
sis
, and the default
output
frequency
is 50Hz.
To
change
the output
frequency, press the SEL button.
. Touch the probes to the desired test points.
*Do not input voltage at this setting.
14
Advertisement
Table of Contents
