Table of Contents
Advertisement
Measure Frequency and Duty Cycle
1. Connect the black test lead to the COM Terminal and
the red lead to the ¥3i* Terminal;
2. Turn the rotary switch to
"*
, press SELECT
to frequency test function (210V , 1~100KHZz); or
turn the rotary switch to . 4g
, press SELECT
to frequency test function ($10V , 1~5MHz);
3.
If the
frequency
between
100kHz
and
5MHz,
press SELECT
to enter AC
mV
position. Touch
the probes to the desired test points, now the vice
display
will
show
frequency;
Then
press
the
SELECT
again,
the
main
display
will
show
frequency and vice display will show duty cycle.
12
Advertisement
Table of Contents
