Width And Height Properties - Epson TM-L90 Series Development Manual

3.1.3 Width and Height Properties

The width and height properties are explained in the following.
RecLineSpacing
JrnLineSpacing
SlpLineSpacing
SlpLineHeight [dot]
RecLineHeight [dot]
JrnLineHeight [dot]
SlpLineWidth [dot]
RecLineWidth [dot]
(When 80mm is set)
JrnLineWidth [dot]
RecSidewaysMaxLines
RecSidewaysMaxChars
(When Font A is selected)
RecSidewaysMaxChars
(When Font B is selected)
RecLinesToPaperCut
SlpSidewaysMaxLines
SlpSidewaysMaxChars
SlpMaxLines
X: No settings
*1
In the case of a line thermal station, the Line Spacing setting is identical with the height
of the characters which means that it can be set at up to 17 when Font B is selected.
*2
It can be changed by the settings of the RecLineSpacing or the character height.
*3
It can be changed by the settings of the XxxLineSpacing or the XxxLineHeight.
The value differs accordance with the selected paper width.
*4
It can be changed by the settings of the font width, or the selected paper type.
*5
The value differs by the settings of the paper width or the layout of the label.
Property
11
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-L90)
Version 3.00 Feb. 2019
Settings
Default Maximum
Value value [dot]
30 127
X X
X X
X
24,17
X
X
*5
576
X
*3
19
*4
123
*4
164
*2
6
X
X
X
Minimum
value [dot]
*1
24
X
X