Epson TM-T81M Series Development Manual page 7

connected. If connected, set ON. If not, set OFF.
Set DIP-SW2-3 and DIP-SW2-4 (Specification of the print density) to match the
environment of use.
Make other settings in accordance with the settings described above.
When using with the power saving mode, set DIP-SW2-3 and DIP-SW2-4 to ON.
2) Parallel Port
DIP-SW 1
No. Setting
1 OFF
2 OFF
3 OFF
4 OFF
5 OFF
6 OFF
7 OFF
8 OFF
It is possible to change the settings of DIP-SW1-1 (Auto line feed) and
DIP-SW1-2 (Specification of the received buffer capacity), but it is recommended
to leave them OFF.
Set DIP-SW2-3 and DIP-SW2-4 (Specification of the print density) to match the
environment of use.
Make other settings in accordance with the settings described above.
When using with the power saving mode, set DIP-SW2-3 and DIP-SW2-4 to ON.
3) USB Port
DIP-SW1
No. Setting
1 OFF
2 OFF
3 OFF
4 OFF
5 OFF
6 OFF
7 OFF
8 OFF
APPLICATION DEVELOPMENT GUIDE
POSPrinter(TM-T81M/TM-T81IIM/TM-T81IIM-42C)
DIP-SW 2
No.
Recommended
Recommended
Fixed at OFF
Fixed at OFF
Fixed at OFF
Fixed at OFF
Fixed at OFF
Fixed at OFF
DIP-SW2
No.
Recommended
Recommended
Fixed at OFF
Fixed at OFF
Fixed at OFF
Fixed at OFF
Fixed at OFF
Fixed at OFF
3
Version 3.00 Feb. 2019
Setting
1 ON Recommended
2 OFF Fixed at OFF
3 OFF Settable
4 OFF Settable
5 OFF Fixed at OFF
6 OFF Fixed at OFF
7 OFF Fixed at OFF
8 ON Fixed at ON
Setting
1 OFF Recommended
2 OFF Fixed at OFF
3 OFF Settable
4 OFF Settable
5 OFF Fixed at OFF
6 OFF Fixed at OFF
7 OFF Fixed at OFF
8 ON Fixed at ON