Cleaning And Maintenance - Hotpoint Ariston CM TDC Dxy Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 10
are under pressure, shall not be opened during use.
The appliance is not to be used if it has been dropped, if there are
visible signs of damage or if it is leaking.
The outer surface temperature can become very high when the
appliance is operating. Do not touch the hot surfaces and allow to cool
before handling the appliance, its detachable parts and its
accessories.
Prevent contact with brewed hot coffee during brewing cycle.
Maximum brewing temperature is 80°C.
The container is designed for use with this appliance. It cannot be
used on a range top.
Never leave the empty carafe on the warming plate otherwise the
carafe is liable to crack.
Do not set a hot container on a wet or cold surface.
Do not let the coffee maker operate without water.
Scalding may occur if the cover is removed during the brewing
cycles.
WARNING: Do not use the appliance if the surface is cracked.

CLEANING AND MAINTENANCE

WARNING: Ensure that the appliance is switched off and
disconnected from the power supply before performing any
maintenance operation; never use steam cleaning equipment or spray
detergents on the appliance - risk of electric shock.
Wipe the base, control knob, and feet with a damp cloth. All
removable parts can be washed in hot, sudsy water. After washing
rinse, dry immediately and thoroughly.
Do not clean the appliance with flammable or explosive liquids. Do
not use any harsh solvents, alkaline cleaning agents, abrasive
cleansers or scouring agents of any kind when cleaning. Do not
immerse the appliance in water for cleaning.
Clean the appliance after each use and not allow any stagnant
liquids in the bowls
it en
13

Advertisement

Table of Contents
loading

Table of Contents