2.14 MOUNTING THE FREEWHEEL SYSTEM
DANGER
RISK OF INJURY DUE TO LIMITED FREEWHEEL FUNCTION DUE TO INCORRECT
LUBRICATION!
If too much grease is applied on the ratchets, the actuation of the ratchets may not work. The
ratchets may slip during pedaling.
• Only apply a thin, even layer of grease.
• Only use the red DT Swiss special grease.
1. Apply DT Swiss special grease evenly to the
outer and the inner toothing of the ratchets
using a fine brush.
→ For an optimal functionality of the
freewheel system, a thin layer of grease
is sufficient.
2. Put the spacer onto the axle.
18