Table of Contents
Advertisement
1
2
E70949
1.
Remove the wing nut(s).
2.
Pass the bracket and cable through
the wheel opening.
Vehicle jack
WARNINGS
The vehicle jack supplied with
your vehicle should only be used
when changing a wheel in emergency
situations.
Before using the vehicle jack,
check that it is not damaged
or deformed and that the thread is
lubricated and free from foreign matter.
Never place anything between
the jack and the ground, or the
jack and the vehicle.
The jack, wheel brace and jack handle
are located in a storage compartment in
the front right stepwell.
Wheels and tyres
430 and 460 series vehicles
1
E70959
•
•
All except 430 and 460 series
vehicles
E70957
•
-113-
Assemble the jack handle.
Slide the flat end of the jack handle
over the locking valve. Turn the
handle fully clockwise. Insert the
handle into the pump, and lift the
vehicle using a pumping motion.
Unfold the jack handle.
Advertisement
Table of Contents
