G800 Service Manual
6.4. 6.2.7 Vibrator not working
Check to see if U101 No. C5(Q105.2) pin is 2.8V(duty:70%, 70Hz) : CP131
NO
Check to see Q105 cold solder,broken,short to the other PCB pattern or not
If you find out any defect, you replace it
Check to see J103.11 is same with battery power : CP131,CP132
NO
Check to see R160 cold solder,broken,short to the other PCB pattern or not
If you find out any defect, you replace it
3.Check to see Vibrator If you find out any defect, you replace it
PANTECH
CP131
`
CP131
`
- 37 -
J103
`
CP132
`
CP132
`
R&D CONFIDENTIAL