Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Techroutes S3740F
Summary of Contents for Techroutes S3740F
- Page 1 S3740F Hardware Installation Manual...
-
Page 2: Table Of Contents
2.2.4 Electrostatic Discharge Damage Prevention ............. 7 2.3 Environment ......................... 2.3.1 Location Configuration Prevention ................2.3.2 Cabinet Configuration ....................7 2.3.3 Power Requirements ....................8 2.4 Installation Tools and Device ....................Chapter 3 Installing S3740F Switch ....................9 3.1 Installation Flow of S3740F ....................9... - Page 3 3.2 Installing the Machine Box of the Switch ................9 3.2.1 Installing the Machine Box on the Desk ..............3.2.2 Installing the Machine Box on the Cabinet .............. 10 3.3 Connecting the Port ......................10 3.3.1 Connecting the Console Port ................... 3.3.2 Connecting 10G Ethernet SFP+ ports ..............
- Page 4 5.2 Indicator Description ......................17...
-
Page 5: Chapter 1 S3740F Introduction
SFP+ interface, LINK/ACT indicator Console port A rate of 9600bps, mini USB interface Figure 1-1 Front template of the S3740F switch Table 1-2 Parts at the front template of the S3740F switch Abbrev. Name Description If the switch is powered on, the Power indicator indicator is on. - Page 6 CONSOLE Console port Manages the switch locally. Additionally, S3740F has a grounding column and a power socket at its back. Figure 1-2 Back template of the S3740F switch Table 1-3 Parts at the back template of the S3740F switch Abbrev.
-
Page 7: S3740F Systematic Characteristic Parameters
S3740F Hardware Installation Manual 1.2 S3740F Systematic Characteristic Parameters IEEE 802.1d Spanning Tree Protocol IEEE 802.1s multiple spanning trees IEEE 802.1p Class of Service Protocol IEEE 802.1q tagged VLAN Supported standard standard IEEE 802.3x Flow control IEEE 802.3z asymmetric flow control IEEE 802.3ad Link aggregation... -
Page 8: Rohs Description
S3740F Hardware Installation Manual Input voltage:AC90～264V， Input frequency: 47～63Hz Power characteristics Input current: 3A (MAX) Output voltage:12VDC Output current :12.5A(MAX) Power consumption 5.7KG Net weight 1.3 ROHS Description - 4 -... -
Page 9: Chapter 2 Installation Preparation
S3740F Hardware Installation Manual Chapter 2 Installation Preparation 2.1 Caution of Usage Similar to other electronic products, the semiconductor chip easily gets damaged if you power on or off abruptly and frequently. To restart up the switch of , you have to open S3740F the power on-off after the power is cut down for three to five seconds. -
Page 10: Safety Principles For Live Working
S3740F Hardware Installation Manual The final configuration of products must comply with relative national laws and regulations. 2.2.3 Safety Principles for Live Working When you work under electricity, following the following principles: Put off ornaments, such as ring, necklace, watch and bracelet, before you operate under live working. -
Page 11: Electrostatic Discharge Damage Prevention
S3740F Hardware Installation Manual unpainted metal part of the machine box. In this case, the static is discharged to the ground through the metal cable of the clip. You can also discharge the static to the ground through your body. -
Page 12: Power Requirements
2.4 Installation Tools and Device The tools and devices to install the S3740F switch are not provided by the switch. S3740F You yourself need to prepare them. -
Page 13: Chapter 3 Installing S3740F Switch
Installing the machine box on the desk Installing the machine box on the cabinet 3.2.1 Installing the Machine Box on the Desk The S3740F switch can be directly put on the smooth and safe desk. Note: - 9 -... -
Page 14: Installing The Machine Box On The Cabinet
Figure 3-1. Figure 3-1 Fixing the machine box of the switch Caution: The switch shown in figure 3-1 does not represent the material S3740F. After the brackets are installed, install the switch on the cabinet. See Figure 3-2. Figure 3-2 Installing the switch on the cabinet 3.3 Connecting the Port... - Page 15 One end of the cable is a mini USB plug and the other end is a 9-hole plug (DB9). See the following figure: Figure 3-4 Cable connection at the console port Figure 3-5 Connecting the console port of S3740F and computer Table 3-1 Pins of the console port Name...
-
Page 16: Connecting 10G Ethernet Sfp+ Ports
No connect Note: The console port of S3740F does not support traffic control. Therefore, you must set the option data traffic control to none when you configure the switch with the super terminal. Otherwise, the single-pass problem will arise on the super terminal. -
Page 17: Connecting Gigabit Ethernet Tx Ports
Because the 8 10/100/1000Base-T ports of S3740F support the MDI/MDIX self- identification of the cable, S3740F can adopt five types of direct-through/cross network cables when it connects other Ethernet terminals. Figure 3-8 Connecting the 1000Base-TX port and other Ethernet terminals... -
Page 18: Connecting Gigabit Ethernet Sfp Ports
Sending/receiving the paraphase of the data 3 TP3- 3.3.4 Connecting Gigabit Ethernet SFP ports The S3740F switch has 24 Gigabit SFP ports. To use the optical port, you need connect it to the SFP optical module, and then to other Ethernet terminal devices through an optical fiber. -
Page 19: Chapter 4 Maintaining Switch
S3740F Hardware Installation Manual there is enough space for the switch to discharge its heat and whether the desk is stable. Check whether the connected power meets the power requirements of the switch. Chapter 4 Maintaining Switch Caution: (1) Before opening the machine box, make sure that you have released the static you carried and then turn off the power on-off of the switch. -
Page 20: Closing The Machine Box
S3740F Hardware Installation Manual Caution: The switch shown in the above figure does not represent the material S3740F. When the cover is opened, put it aside. The mainboard of the system appears. Note: After taking off the cover, put it horizontally and avoid it to be crushed or collided. -
Page 21: Faults Relative With Power And Cooling System
9600 bps, eight data bits, no sum check bit, one stop bit and no traffic control. 5.2 Indicator Description The LED indicator shows that the switch is running. The following table shows the indicators of the S3740F switch and their description: Abbrev. Name Description... - Page 22 S3740F Hardware Installation Manual When the indicator is always on, the port is linked. LINK/ACT Upper indicator for each port When the indicator is off, the link is not linked. Copyright Claims Without the written approval of the company , any person or group cannot transcribe, copy or change partial or all contents of this manual, and must not broadcast it in any manner.
Need help?
Do you have a question about the S3740F and is the answer not in the manual?
Questions and answers