Package Contents - D-Link DKVM-IP16 Quick Installation Manual

Package Contents

16-PORT KVM OVER IP SWITCH
DKVM-IP16
KVM CABLE WITH VGA AND USB (x4)
CONNECT THE DKVM-IP16 TO YOUR COMPUTERS
POWER ADAPTER
RACKMOUNT BRACKET (x2)
CD
QUICK INSTALLATION GUIDE
If any of these items are missing from your packaging, please contact your reseller.
Installing the DKVM-IP16
The DKVM-IP16 supports hot-plugging. You don't need to turn your computers off before installing
the device.
A. Attach your USB keyboard connector to the console USB port of the DKVM-IP16.
B. Attach your USB mouse connector to the console USB port of the DKVM-IP16.
C. Attach your monitor's HDB 15 VGA connector to the console port of the DKVM-IP16.
The following steps below apply to each computer that you are using with your DKVM-IP16.
D. Attach the KVM cable (VGA connector) to the VGA port located on the DKVM-IP16.
E. Attach the KVM cable (USB connector) to the USB port located on the back of
your computer case.
F. Attach the KVM cable (VGA connector) to the VGA port located on the back of your computer
case.
Installation of the DKVM-IP16 is now complete.
Switching with the DKVM-IP16
The DKVM-IP16 features the buttons located on the front panel to switch quickly and easily between
your computers.
Note: Don't switch PC without finishing PC boot-up.
Hot Keys
You can also use keyboard
Caps Lock / Scroll Lock / Num Lock
A beep confirms that the Hot Key mode is activated. By default, the Home key is used to enter the
Hot Key mode. Alternatively, you can use the Caps Lock, Scroll Lock or Num Lock keys.
DKVM-IP16
Hot Keys to switch between your computers. Press the
key twice within 2 seconds to enter Hot Key switching mode.
Home /
2