Jump Starting The Vehicle - Ford Transit 2014 Owner's Manual

4. Press the brake pedal, and then press
and hold the button until the engine
starts.
Note: Various system checks are
automatically carried out before the vehicle
will restart. if your vehicle fails to restart
after the third attempt, the system has
detected a fault that requires service. We
recommend you contact an authorized
dealer.

JUMP STARTING THE VEHICLE

WARNINGS
Do not use fuel lines, engine rocker
covers or the intake manifold as
grounding points.
Connect batteries with only the same
nominal voltage.
Always use booster cables with
insulated clamps and adequate size
cable.
Note: Do not disconnect the battery.
Transit (TTG) Vehicles Built From: 05-07-2014, Australia, EK3J-19A321-BDA (CG3612enAUS) enAUS, Edition date: 06/2014, First Printing
Roadside Emergencies
126
To Connect the Booster Cables
1
B
E75524
A Flat battery vehicle
B Booster battery vehicle
1 Positive connection cable
2 Negative connection cable
E145290
1. Position the vehicles so that they do
not touch one another.
2. Switch the ignition off and any
electrical equipment.
A
2