JVC KD-X351BT Instruction Manual page 20

AUDIO SETTINGS
(Not applicable when 3-way crossover is selected.)
FADER
POSITION R15 to POSITION F15 (POSITION 00): Adjusts the front and
rear speaker output balance.
POSITION L15 to POSITION R15 (POSITION 00): Adjusts the left and
BALANCE * 4
right speaker output balance.
LEVEL –15 to LEVEL +06 (LEVEL 00): Preset the initial volume level
VOLUME ADJUST
of each source (compared to the FM volume level). Before adjustment,
select the source you want to adjust.
LOW POWER: Limits the maximum volume level to 25. (Select if
AMP GAIN
the maximum power of each speaker is less than 50 W to prevent
damaging the speakers.) ; HIGH POWER: The maximum volume level
is 35.
(Not applicable when 3-way crossover is selected.)
SPK/PRE OUT
Depending on the speaker connection method, select the appropriate
setting to get the desired output. ( 21, Speaker output
settings)
Depending on the crossover type you have selected ( [X ' OVER
SPEAKER SIZE
TYPE]), 2-way crossover or 3-way crossover setting items will be
shown. ( 21, Crossover settings)
X ' OVER
By default, 2-way crossover type is selected.
DTA SETTINGS
For settings,
23, Digital Time Alignment settings.
CAR SETTINGS
Caution: Adjust the volume before changing the [X ' OVER TYPE] to
X ' OVER TYPE
avoid the sudden increase or decrease of the output level.
(Displayed only when [3-WAY] is selected)
2-WAY
YES: Selects two way crossover type. ; NO: Cancels.
(Displayed only when [2-WAY] is selected)
3-WAY
YES: Selects three way crossover type. ; NO: Cancels.
20
ENGLISH
SOUND EFFECT
(Not applicable for TUNER source.)
SPACE ENHANCE
SMALL/MEDIUM/LARGE: Virtually enhances the sound space. ;
OFF: Cancels.
LEVEL1/LEVEL2/LEVEL3: Virtually makes the sound more realistic. ;
SND RESPONSE
OFF: Cancels.
LOW/MIDDLE/HIGH: Virtually adjust the sound position heard from
SOUND LIFT
the speakers. ; OFF: Cancels.
ON: Boosts the frequency to reduce the noise heard from outside the
VOL LINK EQ
car or running noise of the tyres. ; OFF: Cancels.
(Not applicable for TUNER source and AUX source.)
K2 TECHNOLOGY
ON: Improve the sound quality of compressed music. ; OFF: Cancels.
* 1 Displayed only when [SUBWOOFER SET] is set to [ON]. ( 19)
For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W].
* 2
( 21)
For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or
* 3
[SUB.W/SUB.W]. ( 21)
This adjustment will not affect the subwoofer output.
* 4