Table of Contents
Advertisement
To view version information for CO cables:
1.
Click the Configure tab in the OBWI, then click Versions > CO Versions in the left column.
Figure 4.7: CO Versions window
2.
Click the eID of the CO cable for which you want to view the firmware version.
NOTE: The LCM8/LCM16 switch supports KCO, UCO, VCO, and VCO2 cables.
NOTE: Resetting a CO that is connected directly to a server (not a cascaded switch) may cause the mouse/
keyboard to fail. When this occurs, reboot the target server.
To reset a CO cable:
1.
Click the Configure tab in the OBWI, then click Versions > CO Versions in the left column.
2.
Click the eID of the CO cable you want to reset.
3.
Click Reset. A message appears warning you that this function is reserved for cascaded
switches and that resetting the CO cable may result in the need to reboot the server.
4.
Click OK to continue.
-or-
Click Cancel to return to the CO Versions sub-category.
Chapter 4: Web interface operations
39
Advertisement
Table of Contents
