How To Operate - Velleman CAMSET3 Instruction Manual

5. HOW TO OPERATE

1) Activation of units
(1) When the call button of the outside camera is pressed, the indoor
units' chime rings and the visitor's picture will appear on the indoor
unit's monitor.
(2) After the visitor is visually identified, and you wish to converse with
the visitor, lift the handset and converse. The unit will remain
activated for approximately 150 seconds before it automatically
shuts off. To re- activate for continued conversation push the
"monitor on" button.
2) Activation of outside unit from inside unit
(1) Press the monitor- on button of the indoor unit at any time and the
outdoor camera will be activated and show as outside view.
3) Working time
(1) Call time: approximately 30 seconds
The picture terminates automatically if indoor unit is not answered
within approximately 30 seconds after the call button of the outdoor
camera is pressed.
(2) Talk time: approximately 150 seconds
When the indoor monitor unit is called by the outdoor unit and the
indoor monitor handset is picked up, there is approximately 150
seconds of time available before the unit automatically shuts off.
(3) Monitor time : approximately 30 seconds
When
approximately 30 seconds of viewing time before unit automatically
shuts off.
4) Door open function
(1) With separate purchase of electric DC door lock system, indoor unit
can be wired to activate door open.
5) Installation location
(1) Care must be take when selecting a site to install the outdoor
camera unit. Damage could result from a site that exposes the
outside unit to direct rainfall, strong vibrations or excessive dust. For
optimum video display, unit should also be protected from direct
sunlight. Inferior picture quality can also occur, should the lens cover
become scratched.
CAMSET3
outside camera is activated from
9
inside, there
GB
is