Installation - Panasonic DBS 40 Installation Manual

Section 3004nstallation

Installation

Installing an OPX Station Without Going Through a Central Office
Figure 5-S. Cable punch- out i
Table 5-5. Maximum distances for OPX Adaptor installation
DBS-70-300
Technical Manuals Online! - http://www.tech-man.com
The following procedures describe direct OPX connection and OPX
connection through a CO. Order an OL13C circuit for an OPX through a CO.
Refer to Figure 5-6 on page 5-13 when installing the OPX.
1. Remove the cover from the OPX Adaptor.
2. Remove the cable punch-out plate (Figure 5-12) to make an opening for
the cables coming into the OPX Adaptor.
To remove the plate, cut the grooves on either side with diagonal shears.
Then bend the plate back and forth with needle-nose pliers to remove it.
de. OPX Adabtor
3. Mount the OPX Adaptor to the wall.
Note: Table 5-5 shows how far the Adaptor can be located from the DBS.
Wiring gauge
AWG 22
AWG 24
AWG 26
DBS Manual - Issued 8/lY95
Chapter 5. Peripheral Eauioment
Max. distance (in feet) between the DBS and
OPX Adaptor
309
194
122
5-11