Cleaning The Lint Filters - Insignia NS-FDRE44W1 User Manual

Press and hold both the
1
seconds. The
To turn off the child lock, press and hold both the
2
Alert buttons for three seconds. The

Cleaning the lint filters

WARNING:
• Do not operate your dryer without the lint filter in place.
• Do not use a damaged or broken lint filter. This may reduce performance
and/or cause a fire.
Note:
• You should clean the lint filter after every load to shorten the drying time
and to make sure that your dryer is running efficiently.
• If the lint is difficult to wipe away, you can gently wash the filter in mild,
soapy water. Make sure that you rinse all the soap off the filter and that the
filter is dry before you put it back into your dryer.
• Gently pull the lint filter out of the slot at the bottom of the drum. Remove the
accumulated lint, then insert the filter back into the slot. Discard the lint.
Note: When you turn on the power and before you start your dryer, the lint
filter indicator automatically flashes for 10 seconds to remind you to check the
filter.
32
OPERATING INSTRUCTIONS
(volume) and Damp Alert buttons for three
child lock light turns on.
Lint filter
www.insigniaproducts.com
(volume) and Damp
child lock light turns off.