Page 1
TOUCH TOUCH DIGITAL MANUAL NOVEMBER 2021 VERSION 1.2 I N STALLATI O N A N D U S E R I NST R U C TI O NS...
Page 2
TONE product, or damage to other objects in the vicinity. This document and all other collateral documents are subject to change at the sole discretion of TONE.
TABLE OF CONTENS 1. PROPER USE 1.1 For your safty 1.2 Explanation of safety warnings DESCRIPTION OF THE PRODUCT 2.1 Purpose of the Product 2.2 Contents 2.3 Appliance overview INITIAL USE 3.1 Place of use 3.2 Pumbing Connection 3.3 Electrical Connection 3.4 Initial set-up PROCESS/WORKFLOW 4.1 Brewing...
PROPER USE 1. PROPER USE INFORMATION COR- RECT DISPOSAL OF THE This machine shall be destined exclusively to PRODUCT ACCORD- the use it has been expressly designed for. ANCE WITH EC DIRECTIVE Any other use shall be considered illsuited 2012/19/EU and improper.
Page 5
In order to ensure the e ciency and correct functioning of the appliance, it is necessary WARNING BEFORE to follow the instructions provided by the SERVICING OR OPENING manufacturer and to carry out its ordinary this device make sure the maintenance.
DISCRIPTION OF THE PRODUCT 2. DESCRIPTION OF THE PRODUCT 2.1 Purpose of the Product 2.2 Contents 1x Machine 01 brewer This machine shall be destined exclusively to 1x Filter coffee basket the use it has been expressly designed for. 1x Silicon tube for drainage of the boiler Any other use shall be considered illsuited 1x Equalizing valve and improper.
3. INITIAL USE m run, use 1/4“ copper tubing and connect to 1/2“ or larger water line. For longer runs, Before using your TONE Touch 01 use 3/8“ copper tubing & connect to 1/2“ or larger water line and provide an adapter 3.1 PLACE OF USE...
INITIAL USE 3.4 INITIAL SET-UP color coding of each conductor at the elec- trical source. For models without a cord, re- move the rear top cover then the rear panel Insert an empty brew basket into the brew and feed the cord through the strain relief. rails.
4. PROCESS/WORKFLOW 4.1 BREWING – MAIN BREW HEAD to the main/standby screen if desired. If unit has been idle for some time, a tank fi lling Place coffee, tea or oth- screen may display as the tank is refi lled. A er product to be brewed heating screen will display, if the recipe tem- into a paper fi lter with-...
Page 10
PROCESS/WORKFLOW Successful password quickly change status to active or inactive entry will bring you on multiple recipes. Pressing the “Active” to the ‘Programming/ button will toggle the status Service’ menu screen. of the recipe between available and not These are the cate- available.
Page 11
basket. There is one brew valve turned on this screen to be greyed out as none of the of the two possibly available. This setting items would be applicable. Press return to will impact allowable brew time since water return to the ‘recipe settings’ screen. delivery is different for 1 or 2 brew valves.
PROCESS/WORKFLOW return to the ‘edit recipe name’ screen. Se- Save to store the service telephone num- lect return to go back to the ‘recipe settings’ ber. CLR will clear entry without exiting the screen then press return again to return to screen.
4.4 PARAMETERS Pressing cancel will The ‘brewer parame- exit the screen. ters’ screen is meant for factory settings. Contact factory The calibrate screen password authoriza- will display. Items that tion for these settings. are not installed or Press the “Brewer Pa- that have been disabled in the parameters rameters”...
To clean the surface of TONE equipment is necessarily cause the brewer to shut down. recommended to use a damp cloth rinsed in Press “Reset Errors” to reset the error count liquid detergent.
Never immerse the appliance itself, the power supply cable or plug in water. Descaling of TONE equipment only by qual- Never attempt to touch or pick up and ifi ed personnel. electrical appliance if it has fallen into water.
2800W Control Boards- 2 years parts, 1 year labor. Equipment manufactured by others and Noise level < 70 dB distributed by TONE - Please see original equipment manufacturers warranty, TONE Kaffeemaschinen AG will follow. EEC CONFORMITY DECLARA- TION ACT 2006/42/EC...
Page 17
THE SALE OF THIS EQUIPMENT, WHETHER gaskets. DERIVED FROM WARRANTY OR OTHER- WISE, SHALL BE LIMITED, AT TONE KAF- This warranty is conditioned on the Buyer FEEMASCHINEN AG’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACE- 1) giving TONE Kaffeemaschinen AG prompt MENT OR REFUND.
Page 18
TONE Kaffeemaschinen AG Address: Kasernenstrasse 5 3600 Thun Switzerland Device Name: TONE TOUCH 01 Model Type: 900300 Function: Coffee Machine We herewith declare under our sole responsibility that the above mentioned device meets all the provisions of the following EC Council Directives and Standards. All supporting documentations are retained under the premises of the manufacturer.
APPENDIX - CONDENSED OPERATION ing the phone number and using keypad and save function. The company name may be edited using the L,R keys to select let- BREWING ter to be changed. Then use Up/Down keys to change letter. Change between symbols Insert funnel with product to brew as ap- and upper and lower case letters using key plicable.
Page 20
APPENDIX set error messages. Press Finish to return tion of the valve. If turned on without an to Service Menu. Press the Counters key actual valve, recipe would be short any pro- to view water usage and number of cycles grammed bypass.
Page 21
TONE Kaffeemaschinen AG Kasernenstrasse 5 3600 Thun Switzerland +41 52 620 06 06 contact@tone-swiss.com www.tone-swiss.com Follow us, tag us and share your experience with us on social media. @tone.swiss...
Need help?
Do you have a question about the TOUCH 01 and is the answer not in the manual?
Questions and answers