Optional Parts; Lug Kit - Siemens SIKOSTART 3RW35 Instruction Manual

10.2 Optional Parts

10.2.1 Lug Kits
Table 7 lists lug kits for use with the SIKOSTART 3RW35 con-
trollers. Each kit provides a method of adapting a controller for
use with aluminum or copper power wiring. One kit contains
lugs for either the line or load side of the controller. Two kits are
required to add lugs to both line and load terminals.
Figure 21 shows a lug in position for mounting to the terminal.
The table 7 Lug Hardware Torque column indicates the torque
required for the screw that secures the lug to the controller ter-
minal. The Wire Size Range column lists the wire sizes that the
lug can accommodate. Table 2 in this manual indicates the
torque required for the set screw that secures the wire in the
lug.
Complete installation instructions are furnished with each lug
kit.
Note:
Mount lug under terminal as shown.
Figure 21 - Mounting Lug on Terminal Point
Siemens Energy & Automation, Inc.
Table 8 Lug Kits
Wye
Operational

Lug Kit

Current Part
Rating Number
35, 57 , 69,
80 & 105 91D81755011
131 & 195 91D81755012
248 91D81755013
361 91D81755016
480 - 720 91D81755014
960 91D81755015
Lug
Hardware
Torque Wire Size
(lb-in.) Range
2/0 to #
75 14 AWG
275 350 MCM
to #6 AWG
275 (1) 600 MCM
to #6 AWG
or (2) 250 MCM
to #1/0
275 (2) 350 MCM
to #4 AWG
275 (3) 350 MCM
to #6 AWG
275 (4) 350 MCM
to #6 AWG
35