AmazonBasics B07V8X5W5R Quick Start Manual page 9

Use the honing guide to ensure an accurate sharpening angle of the
cutting edge (C)�
1� Turn the width adjustment screw (E) of the honing guide in anti-
clockwise direction to widen the intake (D, G)�
2� Place the chisel with the bevel (B) facing down in the chisel
intake (G)� Turn the width adjustment screw (E) in clockwise
direction to lock the chisel in place� Depending on how much
the chisel protrudes from the chisel intake (G), the cutting edge
angle of the chisel will be adjusted accordingly�
For chisel intake (G)
Protruding
30 mm
40 mm
Angle Suitable for
30° Softer wood
25° Harder wood
EN
9