64
EL3000 CONTINUOUS GAS ANALYZERS | OI/EL3000-EN REV. D
... 5 Installation
... Position and design of the gas connections
Gas connections Limas23 with Magnos206 (model EL3040)
+
Figure 17: Gas connections Limas23 with Magnos206 (model EL3040)
Limas23: Gas connections
Pos.
Connection
13
Sample gas inlet
14
Sample gas outlet
11
Pressure sensor
Purge gas inlet (housing)
12
Purge gas outlet (housing)
Note
•
The oxygen sensor is not possible in combination with Magnos206
•
The pressure sensor (default, not used with the "pressure sensor outwards" option is internally connected at the output of the
sample cell.
Supplementary information
—
—
For 'Pressure sensor connected to the outside by hose'
option
Not for 'Pressure sensor connected to the outside by hose'
option
Version
⅛ NPT female thread (stainless steel 1.4305)
•
Connection of hose lines:
straight screw-in socket (PP) with hose nozzles
for hoses with inside diameter 4 mm
(included in scope of delivery)
•
Connection of piping:
screw-in fittings
(not included in scope of delivery)