Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Besantek BST-DL71
Summary of Contents for Besantek BST-DL71
- Page 1 OPERATION MANUAL BST-DL71 USB DATALOGGER (Temp./RH/DP/WB)
- Page 2 LOGGER INTRODUCTION A very smart and cost-effective mini USB logger , save your cost without logger cradle ! Many different parameters are selectable with the modern shape design, versatile application is applicable and applied. Ultrasonic sealed housing meets IP57 water resistant for Temp.RH models.
- Page 3 LOGGER SPECIFICATION Model no. BST-DL71 Temp. range -40~85℃ (-40~185℉) Accuracy ±0.5℃/1.2℉(-20~50℃), others±1.2℃ RH% range 0%RH~99.9%RH Accuracy ±3%RH (at 25℃, 10~90%RH), others±5%RH) Dew Point. Wet Bulb Memory capacity 32,000 points Power 3.6V battery 1/2AA Logger 135 x 28.5 mm LOGGER SETUP A.
- Page 4 C Run the software from Windows OS(List above) 1. Plug the USB cable into USB port, since you have already Installed the USB driver, computer will automatically detect logger , → → 2. Find “BST-Pro07” in START PROGRAMS BST Pro07 3.Select logger software folder.
- Page 5 LOGGER SETTING BASIC:(Pic.3) 1:ID setting Maximum 20 characters , name your logger press OK button to confirm. 2:Current Date/Time Clock setting, the system automatically shows current date and time of your PC. Press OK to confirm. (Note :Schedule date & time refer to current pc date and time) ►Click OK to sync the meter’s date and time every time.
- Page 6 3.Select Unit : Select Temperature unit °C/°F,press OK to confirm. (a) Immediate Select immediately start mode by pressing the OK button. Logger starts recording at once. (b) Schedule start mode: Select the date and time meter will start recording. Please follow the date and time form (M/D/Y,H:M:S) ( c)Real-time start mode: 1.After set start mode at real-time,datalogger starts login records.
- Page 7 INTERFACE INTRODUCTION Logger Status: Before download data, press LOGGER status to show ID, Records, Sample rate, Unit. NOTE: Once Download button is pressed, recording is inactivated. Download data: Press DOWNLOAD button, data download in few seconds. Graph shows automatically NOTE: Please do not press DOWNLOAD button if you won’t stop record.
- Page 8 Zoom in/out&Move Hold Click = Screen graph zoom in Ctrl Mouse Hold Click Ctrl Mouse Screen graph zoom out Hold Ctrl Shift Click = Move screen graph Mouse Press = Read each measurement . NOTE: If the graph size is over zoom in/out,follow the color select below the graphic will go back to default size Line color selecting: 1.Click the color beside the reading(Temp.
Need help?
Do you have a question about the BST-DL71 and is the answer not in the manual?
Questions and answers