3Com WL-305 User Manual page 7

Exhibit 8: User's Manual
2 Put the End User Utilities CD in the CD-ROM drive. The SETUP program should
start automatically. If it does not start, you can run it manually by selecting Run
from the Start menu.
3 Select Create Diskettes .
4 In the Disk Factory window, click Next .
5 Select the software you want to transfer to diskette. If you select All , you will need
four floppy diskettes.
6 Select the action, for example, Create and Verify Disks , and click Next .
7 When you are ready to install the application software from diskette, put Wireless
LAN Application Disk 1 in the floppy drive and run SETUP .
If you are installing the drivers manually, use the Drivers diskette when the setup
wizard for your operating system prompts for drivers supplied by the
manufacturer.
Disk Factory 7