Table of Contents
Advertisement
Listening to radio broadcasts
The receiver can store up to 40 stations in the memory and recall them
by one-touch operation.
Tuning radio stations
BAND
AUTO/MONO
MULTI %/ fi
BAND
TUNER
1
Use the INPUT SELECTOR key or TUNER key to select the
tuner.
2
Use the BAND key to select the desired broadcast band.
Each press switches the band.
SP
MUTE
A B
CLIP
L
C
R
LFE
SL S
SB
SR
3
Use the AUTO/MONO key to select the desired tuning method.
Each press switches the tuning method to either auto or manual
tuning.
"AUTO" indicator lights up in the display.
• Normally, set to "AUTO" (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
4
Use the MULTI CONTROL knob or MULTI % / fi keys, or
TUNING 1 / ¡ keys to select the station.
"STEREO" lights when a broadcast is being received in stereo.
"TUNED" is displayed when a station is received.
Auto tuning
: The next station is tuned automatically.
Manual tuning : Turn the knob or use the MULTI %/fi keys to
select the desired station.
24
EN
MULTI CONTROL
INPUT SELECTOR
AUTO/MONO
TUNING 1/¡
STEREO
RDS
STEREO
RTY
AUTO
STEREO
AUTO
MEMO
STEREO
TUNED
Presetting radio stations manually
MULTI %/ fi
Input Selector
keys
1
Tune to the station you want to store.
2
Press the MEMORY key while receiving the station.
Blinks for 20 seconds
SP
A B
L
C
R
LFE
AUTO
SL S
SB
SR
Proceed to step 3 within 20 seconds.
(If more than 20 seconds elapse, press the MEMORY key again).
3
Use the MULTI CONTROL knob or MULTI % / fi keys to select
one of the station presets (1 – 40).
4
Press the MEMORY key again to confirm the setting.
• Repeat steps 1, 2, 3 and 4 to store as many stations as
necessary.
• If you store a station at a previously used preset, the old station will
be replaced by the new one.
MULTI CONTROL
MEMORY
INPUT SELECTOR
Lights for 20 seconds
MUTE
CLIP
STEREO
AUTO
MEMORY
MEMORY
STEREO
TUNED
Advertisement
Table of Contents
