Channel Preset Memory - Kenwood KDC-448U Instruction Manual

Channel preset memory

Putting the channel in the memory.
1
Select the channel to put in the memory
Push the Control knob towards right or left.
2
Enter Preset memory mode
Press the [PRESET] button.
3
Select a number and store it in the memory
Turn the Control knob to select memory
number, and then press the Control knob for at
least 2 seconds.
Cancelling the Preset memory mode
Press the [ ] button.
⁄
•
Only the channel number is stored. Category information
is not stored.
•
If you press the [PRESET] button twice in step 2, Mix Station
preset mode is entered with "Mixed Preset List" displayed.
In this mode, different bands and tuner sources (Radio,
Sirius, XM etc.) can be saved in the same preset layer, which
allows you to recall the desired station without switching
the bands or tuner sources.
Maximum of six stations can be preset in the Mix Station
preset mode.
Once the Mix Station preset mode is set, you can enter the
same mode by just pressing the [PRESET] button once in
step 2.
Pressing the [PRESET] button twice returns to the normal
Station preset mode.
Preset tuning
Recalling the channels in the memory.
1
Enter Preset memory mode
Press the [PRESET] button.
2
Select the number you want to recall from the
memory
Turn the Control knob to select recall number,
and then press the Control knob.
Cancelling Preset tuning
Press the [ ] button.
59
|
English