Random Play; Magazine Random Play - Kenwood KRC-708 Instruction Manual

External disc control features
Disc Name Preset Play (DNPP)
If you have preset the name of a disc that you want to listen to
in the disc changer, you can look for it by name and start
playing it.
1
Press the DNPP button on the remote.
"DNPP" will appear in the display, and the disc name preset
play mode is entered.
The preset names/disc titles of the disc in the disc changer to
which you are currently listening are successively displayed for
five seconds each.
In any of the units that are connected, discs that have not
been disc name preset will display "NO NAME" .
NOTE
• This function can only be used in disc changers that were
manufactured or sold as of 1997. Also note that some units
cannot provide a display unless the disc name preset has been
made by the unit that is playing.
• Discs in the disc changer that have never been played before
will appear as "NO ACCES" when the disc names are displayed.
When you cannot identify a disc because of the "NO ACCES"
display after inserting a disc magazine, try playing it using the
disc scan or a similar function to display the disc name. Also
note that "NO DISC" will be displayed when a disc has not been
loaded.
Rapid display (forward / reverse):
+
–
Press the DISC or DISC
+
Pressing the DISC button will rapidly display the preset
names/disc titles in order.
–
Pressing the DISC button will rapidly display the preset
names/disc titles in reverse order.
2
When the name appears for the disc you want to play
Press the OK button.
The disc whose name is displayed will be recalled, and the disc
name preset play (DNPP) mode will end.
To cancel DNPP mode:
Press the DNPP button.
The disc name preset play (DNPP) mode will be canceled.
(Function of Remote)
button.

Random Play

Play all the tracks on the current disc in random order.
1
Press the RDM button to switch random play on and off.
"Random ON" is displayed when random play is turned on.
The track number will change over and over in the display as
the next track is being selected.
When the track has been selected, play will begin.
The selected track number blinks in the display as it is being
played.
NOTE
When all the tracks on a certain disc have been played using
random play, the next disc on the changer will start playing using
the same function.
2
To change the track being heard, press the ¢ button.
Another track will be selected and played.
NOTE
Random play is canceled when you eject the disc.

Magazine Random Play

Play the tracks on all the discs in the disc changer in random
order.
1
Press the M.RDM button to switch magazine random play on
and off.
"M-Random ON" is displayed when magazine random play is
turned on.
The disc and track numbers will change over and over in the
display as the next track is being selected.
When the disc/track has been selected, play will begin.
The selected disc/ track number blinks in the display as it is
being played.
NOTE
This function is not available with the following models:
KDC-C200/C300/C400/C301/C401
— 28 —
(
Function of disc changers)