Track / Disc Repeat; Track Scan; Disc Scan - Kenwood KRC-708 Instruction Manual

connected. Please see your disc changer manual for details.
• Discs are identified by their total length and number of tracks. If
another disc happens to have the same specifications as one
that you have already stored a name for, the name will be
displayed for it, too.
• If you want to change the name of a disc, repeat steps 1 and 2
to display the name, and then repeat steps 3 and 4 to input the
changes.
• Pressing the reset button does not erase the disc names stored
in a disc changer.

Track / Disc Repeat

Repeat playing the track or the disc currently being listened to.
Turning Repeat Play On/Off:
Press the REP button to switch repeat track/disc play on and
off as follows:
M
Track Repeat ON
M
Disc Repeat ON (Function of disc changers)
M
Track/Disc Repeat OFF
"T-Repeat/Repeat ON" is displayed and the track number blinks
in the display when track repeat is on.
"D-Repeat ON" is displayed and the disc number blinks in the
display when disc repeat is on.
NOTE
Repeat play is canceled when you eject the disc.

Track Scan

Successively play the beginning of each track on a disc until
you find the track that you want to listen to.
Starting the Track Scan :
Press the SCAN button. "T-Scan/Scan ON" is displayed and the
first 10 seconds of each track will be played, in order.
The track number currently being heard blinks in the display.
Stopping to Listen to the Track Being Scanned:
Press the 38 or SCAN button again to stop the scan and keep
on listening to a track normally.
NOTE
• The track scan function is canceled when you eject the disc.
• The track scan function only scans each track on a disc once.

Disc Scan

Successively play the beginning of each disc on a changer
until you find the one that you want to listen to.
Starting the disc scan:
Press the D.SCN button. "D-Scan ON" is displayed and the first
10 seconds of each disc will be played, in the order they are
loaded on the changer.
The disc number currently being heard blinks in the display.
Stopping to Listen to the Disc Being Scanned:
Press the 38 or D.SCN button again to stop the scan and keep
on listening to the disc normally.
NOTE
• The disc scan function is canceled when you eject the disc.
• The disc scan function only scans each disc on the changer
once.
• "LOAD" is displayed when discs are being exchanged on the
disc changer.
— 27 —
(
Function of disc changers)