Bluetooth Setup; Bluetooth Setting - Kenwood KIV-BT900 Instruction Manual

Function of KIV-BT900
KIV-700 with KCA-BT300/BT200 (Optional Accessory)

Bluetooth Setup

SRC MENU Volume

Bluetooth Setting

You can select following Bluetooth Setting items.
1
Enter Bluetooth mode
KIV-BT900: Press the [
KIV-700: Press the [PLAY MODE] button for at
least 1 second.
2
Turn the [Volume] knob and press it when the
desired item is displayed.
Select "BT Settings".
3
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Display Overview
"SMS Inbox" Display the received short message.
Refer to
"BT Settings"
"Phone Selection" Select a cell-phone or Bluetooth audio player
connection.
"Audio Selection"*
1
Refer to
Wish to Connect> (page
"SMS Download" Download a short message.
Refer to
"Voice Tag" Registers voice for voice recognition and voice
to select the Phone number category in Phone
book.
- Adding a Voice Dialing Command (page 54)
- Setting a Voice Command for Category (page
55)
"Detailed Setup" Move to detailed item.
"Device Register a Bluetooth device (pairing).
Registration" Refer to
(page
"Special Device
Select"
"Device Delete" Cancel registration of the Bluetooth device.
Refer to
Device> (page
"PIN Code Edit" Specify the PIN code required when registering
this unit using the Bluetooth device.
Refer to
"Auto Answer" Answer a call automatically after lapse of the
preset time interval for automatic answer.
"OFF"/ "0s" – "8s" – "99s"
50
|
KIV-BT900/ KIV-700
] button.
<Display the SMS> (page 56).
<Selecting the Bluetooth Device You
52).
<Downloading the SMS> (page
<Registering Bluetooth Device>
51).
<Deleting a Registered Bluetooth
53).
<Registering PIN Code> (page 52).
"Bluetooth HF"/
"Bluetooth HF/
Audio"* 1
"Call Beep"
"BT F/W Update" Display the version of the firmware of this unit.
"Mic Gain"*
"Noise
Reduction"*
"Echo Cancel
Level"* 2
* 1 Function of KIV-700 with KCA-BT300/BT200 (Optional
Accessory)
* Function of KIV-BT900/ KIV-700 with KCA-BT300
2
(Optional Accessory)
4
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
5
Exit BT Setting mode
Press the [MENU] button for at least 1 second.
56).
Remarks
• "Auto Answer" (Setting the Time Interval for Automatic
Answer)
This function automatically answers (responds to) a call
after lapse of the preset time interval for automatic answer.
"OFF" : Does not answer the phone call automatically.
"0" : Automatically answers the phone call at once.
"1s" – "99s" : Automatically answers the phone call after
lapse of 1 – 99 seconds.
⁄
• If the time set in the cell-phone is shorter than that set in
the unit, the former will be used.
• This function does not work for call waiting.
• "BT F/W Update" (Displaying the Firmware Version)
Display the version of the firmware of this unit.
For how to update the firmware, access our web site.
http://www.kenwood.com/cs/ce/bt/
You can specify output speakers for hands-free
voice communication and Bluetooth audio
sound.
"Front": Outputs voice from the front speakers.
"All": Outputs voice from the front and rear
speakers.
You can output a beep from the speaker when
a call comes in.
"ON": Beep is heard.
"OFF": Beep is canceled.
2 Adjust the sensitivity of the microphone for a
telephone call. Adjust the voice of caller. Setting
to "+" increases the voice volume.
"–3" – "0" – "+3"
Reduce the noises generated by surrounding
2 environment without changing the microphone
volume. Adjust the voice of caller when it is
not clear. Setting to "+" increases the noise
reduction.
"–3" – "0" – "+3"
Adjust the level of echo cancellation. Setting to
"+" increases the echo cancel reduction.
"–2" – "0" – "+2"
( : Factory setting)