Advertisement
Available languages
Available languages
OPERATING YOUR KE 8120 R KETTLE
BEFORE FIRST USE
Before fi rst use, remove all packaging
and advertising labels / stickers from the
appliance. Before using the kettle for the fi rst
time, allow the kettle to boil clean water. Fill
the cattle with clean water, bring to a boil
and then pour the water out. Repeat this
procedure 3 to 4 times. The kettle is then
ready for use. Your kettle will only operate
correctly if placed on its base connected to
an electric outlet. As soon as the water boils,
the kettle will switch off automatically.
USING YOUR KETTLE
1. To fi ll the kettle with water, remove it
from its base and press the handle to
open the lid. This will release the lid
safety switch. Fill the kettle with the
required amount of water. Do not fi ll
the kettle below the minimum or above
the maximum level mark. Lack of water
would lead to turning the kettle off
before boiling. If the kettle is overfi lled,
the boiling water might splash out.
2. Closed lid and make sure it's fi rmly
secured. Place the kettle on its base.
Insert the mains cord plug into a power
socket. A short acoustic signal will sound.
3. Select required temperature using the
and
buttons. The light indicator over
the selected temperature will light in
blue.
4. Press the
button to turn the kettle
on. You can also adjust the temperature
during heating with the
5. Red light indicators over the
temperatures will light step by step
under the selected temperature while
the heating is in progress.
14
OPERATING YOUR KE 8120 R KETTLE
NOTE
If the diff erence between the newly
set temperature and the kettle water
temperature is less than 5°C, the kettle
will not start. In such case, either
increase the set temperature or wait
until the kettle water temperature has
decreased.
NOTE
Never fi ll the kettle if it is located on
the base. Do not fi ll the kettle below
the minimum or above the maximum
level mark. Lack of water would lead
to turning the kettle off before boiling.
If the kettle is overfi lled, boiling water
may splash out.
NOTE
This kettle should be used only with
the supplied base. When pouring out
water from the kettle, be careful to
avoid scalding with hot water. Do not
pour water too fast.
6. As soon as the water boils the kettle
will turn off automatically and an
acoustic alert will sound. The selected
or
button.
temperature's indicator light will be lit
red. Remove the kettle from its base and
press the lid lock to pour water in cup,
mug or other container. To boil water
repeatedly, it's necessary to wait a few
seconds for the heating element to cool
down.
7. To interrupt the water boiling process at
any time, press
.
Advertisement
