Removing The 4G Module - Clevo NL50MU Service Manual

Disassembly

Removing the 4G Module

Figure 10
4G Module Removal
1. Turn off the computer, turn it over to remove the battery
2. The module will be visible at point
a. Locate the WLAN.
3. Carefully disconnect the cables
b. Disconnect the cable
4. The module
and remove the screw.
5. Reverse the process to install a new module (do not forget to replace all the screws and bottom cover).
c. The WLAN module will
pop up and lift it out of
the computer.
a.
b.

5.4G Module
• 1 Screw
2 - 16 Removing the 4G Module
on the mainboard
1
& , and then remove the screw
2 3
(Figure 9c) will pop-up, and you can remove it from the computer.
5
1
2
4
3
(page 2 - 5).
(Figure 9a).
(Figure 9b)
4
c.
5
5