Back Panel Connectors - Gigabyte MC12-LE0 User Manual

1-6

Back Panel Connectors

Serial Port
u
Connects to serial-based mouse or data processing devices.
VGA Port
v
Connect to a monitor device.
Server Management LAN Port
w
The LAN port provides Internet connection with data transfer speeds of 10/100/1000Mbps. This port is
the dedicated LAN port for Server Management.
USB 3.1 Ports
x
The USB port supports the USB 3.1 specification. Use this port for USB devices such as a USB
keyboard/mouse, USB printer, USB flash drive etc.
GbE LAN Port #3
y
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. See the section
below for a description of the states of the LAN port LEDs.
GbE LAN Port #4
z
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. See the section
below for a description of the states of the LAN port LEDs.
ID button with LED
{
When the system identification is active, the ID LED on the front/ back panel glows blue.
LAN and ID Button LEDs
Speed LED Link/Activity LED
LAN Port
• When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
3
1
4
2
10/100/1000 LAN LED:
State Description
Yellow On 1Gbps data rate
Green On 100Mbps data rate
Off 10Mbps data rate
Hardware Installation
- 15 -
5
6
ID button/LED:
State Description
Blue On System identification is active
Off System identification is disabled
7