JVC HM-DH5U Instructions Manual page 39

Other useful functions for recording
You can also use the following functions for
recording.
•
"V. CALIBRATION" (S-VHS/VHS only) (
63)
When this function is set to "ON", this VCR checks
the condition of the tape in use during playback and
recording, and compensates to provide the highest-
possible pictures.
•
Second Audio Recording (
This VCR's built-in MTS decoder enables reception
of Multichannel TV Sound broadcast.
To record a SAP program received, set "2ND
AUDIO REC" to "ON" using the menu screen.
NOTES:
When the channel is changed on the VCR;
•
The "STEREO" indication appears on the screen for about
5 seconds if the program is a stereo broadcast.
•
The "SAP" indication appears on the screen for about 5
seconds if the program is a SAP broadcast.
•
The "SAP STEREO" indication appears when a stereo
program is accompanied by SAP sound.
•
S-VHS Recording Mode (
This VCR allows you to record on a D-VHS and S-
VHS tape with VHS picture quality.
•
"S-VHS ET" ( page 68)
This function allows you to record on VHS tapes
with S-VHS picture quality. Tapes recorded using
this function can be played back on a VCR
equipped with the S-VHS ET function.
page
page 64)
page 67)
Accidental erasure prevention
To prevent accidental recording on a recorded
cassette, remove its record safety tab.
To record on it later, cover the hole with adhesive
tape.
Record safety tab
39
EN