Lionel VISION Owner's Manual page 11

LEGACY and Command Control Remote
Operations
Setting up your VISION Reefer in your CAB-2 remote continued
Using Train Link
To send a command specifically to your VISION Reefer, such as a coupler command or to trigger
loading/unloading, press the Train Link button (see page 12 for button location).
Select one or more commands then press the Train Link button to continue controlling your train.
Note! In order to send commands directly to your reefer, you must press Train Link. The
remote will show the screen above. In this mode, the train itself (ie. the engine) will not
respond because you are sending commands directly to the reefer.
If you wish to control the train press Train Link again. In this mode you will be able to adjust speed,
apply the train brake, access TowerCom and CrewTalk, blow the engine's horn or whistle, and ring the
engine's bell.
11
REEFER COMMANDS