Tuning In To A Preset Station - JVC LVT1286-003A Instructions Manual

Tuning in to a preset station

Presetting stations in the system allows you to
easily tune in to a station.
NOTE
Set the remote control mode selector to
AUDIO before using the number buttons.
Presetting stations
The system stores up to 30 FM stations and up to
15 AM stations.
1
Select a station you want to
store (A page 32 for how to
select).
2
Press MEMORY.
Figures (memory number) blink on the display
window for about 5 seconds.
3
Select the number you want to
store by pressing cursor 2 /3
while the memory number is
blinking.
• You can also select the number by using the
• Refer to "How to use the number buttons"
4
Press MEMORY or ENTER while
the selected number is blinking.
"SET" will be displayed and the selected
station will be stored.
Cursor
(2 /3 )
/ENTER
NOTE
Storing a new station to a used number erases the
previously stored station.
Tuning in to a preset
station
Number
buttons
1
Press FM/AM repeatedly to
select either FM or AM.
2
Press the number buttons to
select the memory number of a
station you want to tune in to.
Refer to "How to use the number buttons"
(A page 15).
You can also select by pressing cursor
Listening to radio
number buttons.
(A page 15).
/3 .
2
33