Listening To A Radio Broadcast - JVC LVT1286-003A Instructions Manual

Listening to a radio broadcast

32
You can tune in to FM or AM.
Selecting a station
1
Press FM/AM.
Each time you press the button, the band will
be alternated between FM and AM.
Example:
2
Press TUNING
to select the station (frequency).
Automatic tuning:
Cursor
Hold down TUNING
(5 // )
system starts searching, and then release the
button.
When a station of sufficient signal strength is
tuned in to, the system stops searching
automatically.
To stop searching manually, press
TUNING
Manual tuning:
Each time you press TUNING
TUNING
• When an FM stereo program is received,
the "ST" (Stereo) indicator lights.
• You can also select the station with
cursor
NOTE
If the stereo FM program currently tuned in to is noisy,
you can improve the reception by pressing FM MODE
to switch to the monaural mode ("MONO" lights). If you
press FM MODE again, or tune in to another station,
the receiving mode returns automatically to the stereo
mode.
or TUNING
or TUNING
or TUNING .
or
, the frequency changes.
.
5 //
Frequency
until the