Listening To A Radio Broadcast; Selecting A Station; Presetting Stations; Tuning In To A Preset Station - JVC GNT0066-001A Instructions Manual

Listening to a radio broadcast

NOTE
Set the remote control mode selector to
AUDIO before using the number buttons.

Selecting a station

1
Press FM/AM.
Each time you press the button, FM and AM
change alternately.
2
Press 4/x to select the
station (frequency).
Automatic tuning:
Hold down 4/x until the system starts
searching, and then release the button. (The
AUTO indicator lights while searching.)
When a station of sufficient signal strength is
tuned in to, the system stops searching
automatically.
To stop searching manually, press 4/x.
Manual tuning:
Each time you press 4/x, the frequency
changes.
• When an FM stereo program is received,
the ST (Stereo) indicator lights.
NOTE
If the stereo FM program currently tuned in to is noisy,
you can improve the reception by pressing FM MODE
to switch to the monaural mode. If you press FM MODE
again, or tune in to another station, the receiving mode
returns automatically to the stereo mode.

Presetting stations

Presetting stations in the system allows you to
easily tune in to a station.
The system stores up to 30 FM stations and up to
15 AM stations.
1
Select a station you want to
store (page 31 for how to
select).
2
Press MEMORY.
"MEMORY" is flashing on the display window
for a while.
3
Select the number you want to
store by pressing number
buttons while "MEMORY" is
flashing.
• Refer to "How to use the number buttons"
(page 15).
• You can also select by pressing
4
Press MEMORY while the
selected number is flashing.
"STORED" appears on the display window
and the selected station is stored.
NOTE
• Storing a new station to a used number erases the
previously stored station.
• After storing new stations, do not unplug the AC
power cord to turn off the system. If you do so, the
new preset stations will be cleared.
Tuning in to a preset
station
1
Press FM/AM to select either FM
or AM.
2
Press the number buttons to
select the memory number of a
station you want to tune in to.
• Refer to "How to use the number buttons"
(page 15).
• You can also select by pressing
1 y
/ .
1 y
/ .
31