Appendices; Approval Certificates And Declarations Of Conformity - Beko BEKOMAT 14i Manual

BEKOMAT ® 14i / 14i CO / 14i CO PN25

16. Appendices

16.1 Approval certificates and declarations of conformity
Symbol Description / explanation
CE marking
The CE marking indicates that a product fulfils all the EU directives applicable for this product
and that basic safety and health requirements were met during manufacturing of the product. The
product may be sold on the European market.
FCC marking
The FCC marking indicates that a product fulfils the requirements of the Federal Communications
Commission (FCC) and that basic safety and health requirements were met during manufacturing
of the product. The product may be sold on the US American market.
cTÜVus marking
The cTÜVus marking indicates that a product fulfils the requirements of TÜV Rhineland for the
Canadian and US American market and that basic safety and health requirements were met
during manufacturing of the product. The product may be sold on the Canadian and US American
market.
EAC marking
The EAC marking indicates that a product fulfils all the Eurasian directives applicable for this
product and that basic safety and health requirements were met during manufacturing of the
product. The product may be sold on the Eurasian market.
WEEE marking
The crossed out rubbish bin marks an electrical or electronic product that must not be disposed
of with domestic waste at the end of its service life. Free collecting points for used electrical
equipment as well as further acceptance points for reuse of the products are available for them to
be returned. Addresses can be obtained from the local authorities.
72 | 76
Original installation and operation manual