LG SIGNATURE R User Manual page 48

If the output speaker is set to
detected in the list of smart devices.
If the speaker output is set to
remote control, then open
speaker.
Connecting USB
Connecting USB
Connect a USB storage device (USB HDD, USB stick) to the USB port on the TV to
enjoy the content files stored on the USB storage device on your TV.
Tips for Using a USB Storage Device
A USB storage device that has a built-in automatic recognition program or uses its own
driver might not be recognizable.
Some USB storage devices may not be supported or may not work properly.
If you use a USB extension cable, the USB storage device may not be recognized or may
not work properly.
Please use only USB storage devices formatted with the FAT32 or NTFS file system
provided by Windows OS. Only reading is possible for USB storage devices formatted in
exFAT format.
It is recommended that you use an external USB HDD with a rated voltage of 5V or less
and a rated current of 500 mA or less. If you use a device requiring a higher voltage/current
than the rated voltage/current, it may not operate properly due to lack of current.
It is recommended that you use a USB hub or USB storage device with a power supply.
We recommend using a storage device with a capacity of 32 GB for the USB memory and
2 TB or less for the USB hard disk.
If a USB HDD with power-saving function does not work turn the hard drive off and on again
to make it work properly. For more information about the USB HDD, see the Owner's
manual.
Data on a USB storage device may be damaged. It is recommended that you back up any
important files. Users are responsible for data management. The manufacturer bears no
responsibility.
Press the button on the remote control. To remove the USB storage device, press the
Eject
button, which appears at the top when you focus on the USB storage device you
want to remove. If you disconnect the USB storage device without selecting
Bluetooth Device
Bluetooth Device
Home Dashboard
48
or has a setup history, the TV may not be
, press and hold the
Sound Share
and select
button on the
to connect the
Eject
, an error