Advertisement

LED TV*
OWNER'S MANUAL
Safety and Reference
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully
before operating your set and retain it
for future reference.
50QNED80AQA
65QNED80AQA
50QNED80UQA
65QNED80UQA
55QNED80AQA
65QNED85AQA
55QNED80UQA
65QNED85UQA
55QNED85AQA
65QNED90UQA
55QNED85UQA
65QNED99UQA
43NANO75UQA
55NANO75UQA
50NANO75UQA
55NANO80AQA
50NANO80AQA
65NANO75UQA
43UQ7070ZUD
55UQ7030PUD
43UQ7070ZUM
55UQ7050ZUD
43UQ7590PUB
55UQ7070ZUE
43UQ7590PUK
55UQ7070ZUN
43UQ8000AUB
55UQ7590PUB
43UQ8000AUK
55UQ7590PUK
43UQ9000PUD
55UQ8000AUB
50UQ7070ZUE
55UQ8000AUK
50UQ7070ZUN
55UQ9000PUD
50UQ7590PUB
65UQ7030PUD
50UQ7590PUK
65UQ7050ZUD
50UQ8000AUB
65UQ7070ZUE
50UQ8000AUK
65UQ7070ZUN
50UQ9000PUD
65UQ7590PUB
32LQ630BPUA 32LQ630BAUA
The model and serial number of the product are
located on the back and on one side of the product.
Record them below in case you ever need service.
Model
Serial No.
*MFL718464322306REV06*
75QNED80AQA
86QNED80AQA
75QNED80UQA
86QNED80UQA
75QNED85AQA
86QNED85AQA
75QNED85UQA
86QNED85UQA
75QNED90UQA
86QNED90UQA
75QNED99UQA
86QNED99UQA
65NANO80AQA
75NANO80AQA
70NANO75UQA
86NANO75UQA
75NANO75UQA
65UQ7590PUK
75UQ7590PUB
65UQ8000AUB
75UQ7590PUK
65UQ8000AUK
75UQ8000AUB
65UQ9000PUD
75UQ8000AUK
70UQ7070ZUD
75UQ9000PUD
70UQ7070ZUM
86UQ7070ZUD
70UQ7590PUB
86UQ7590PUD
70UQ7590PUK
86UQ8000AUB
70UQ8000AUB
86UQ9000PUD
70UQ8000AUK
70UQ9000PUD
75UQ7050ZUD
75UQ7070ZUD
75UQ7070ZUM
www.lg.com
Printed in Korea
Copyright © 2022 LG Electronics Inc.
All Rights Reserved.
Supplier`s Declaration of
Conformity
Trade Name
LG
Responsible
LG Electronics USA,
Party
Inc.
Address
111 Sylvan Avenue,
North Building,
Englewood Cliffs,
NJ 07632
E-mail
lg.environmental@
lge.com
LG Customer Information Center
For inquires or comments, visit www.
lg.com or call;
USA, Consumer
1-800-243-0000
User
USA, Commercial
1-888-865-3026
User
1-888-542-2623 CANADA
Register your product Online!
www.lg.com

Advertisement

Table of Contents
loading

Summary of Contents for LG 0QNED80AQA

  • Page 1 Printed in Korea Safety and Reference Copyright © 2022 LG Electronics Inc. All Rights Reserved. * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference.
  • Page 2: Important Safety Instruction

    By using this product, you agree that all disputes between you and LG arising out of or relating in any way to this product (including but not limited to warranty disputes) shall be resolved exclusively through binding arbitration on an individual basis. The terms of the arbitration agreement (including details on the procedure for resolving disputes) is available at www.lg.com/us/arbitration (USA) or www.lg.com/ca_en/arbitration (Canada).
  • Page 3 Warning! Safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
  • Page 4: Installation

    • Use only an authorized attachments / accessories approved by LG • Do not press strongly upon the panel with a hand or a sharp object such Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage.
  • Page 5: Mounting To The Wall

    We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket, use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.
  • Page 6 Starting TV Turning on the TV Note • When the TV is turned on for the first time after being shipped from the You can simply operate the TV functions, using the button. factory, initialization of the TV may take approximately one minute. Power On (Press) •...
  • Page 7: Specifications

    Remote RS-232C setup To obtain the RS-232C external control setup information, please visit www. lg.com. Download and read the manual, (Depending upon model). • Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.
  • Page 8: Product Information

    Product Information (Only QNED99*) (Only 32LQ63*) Wireless module(LGSBWAX12)Specifications Wireless module(LGSBWAC03)Specifications Wireless LAN (IEEE 802.11a/b/g/n/ac/ax) Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency range Output Power (Max.) Frequency range Output Power (Max.) 2,400 to 2,472 MHz 17 dBm 2,400 to 2,483.5 MHz 20 dBm 5,150 to 5,725 MHz 15 dBm 5,150 to 5,725 MHz 18.5 dBm...
  • Page 9: Open Source Software Notice Information

    LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
  • Page 10 Regulatory...
  • Page 11: Note To Cable/Tv Installer

    If the existing television set is going to be retained and relocated, the same considerations as above should be applied. Symbols Refers to alternating current (AC). Refers to stand-by. Refers to direct current (DC). Refers to “ON” (power). Refers to class II equipment. Refers to dangerous voltage. LG Take-back & Recycling Policy...
  • Page 12: Child Safety

    CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
  • Page 13: External Control Device Setup

    OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com P/NO : MFL71445401 (1901-REV00)
  • Page 14: Key Codes

    KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
  • Page 15 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial(RS-232C) RS-232C IN converter which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
  • Page 16 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
  • Page 17 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
  • Page 18 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
  • Page 19 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
  • Page 20 EXTERNAL CONTROL DEVICE SETUP 08. Color/Colour (Command: k i) 13. Treble (Command: k r) ► To adjust the screen Color(Colour). ► To adjust treble. You can also adjust colour in the PICTURE menu. You can also adjust in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64...
  • Page 21 EXTERNAL CONTROL DEVICE SETUP 18. Equalizer (Command : j v) * Analog Antenna/Cable ► Adjust EQ of the set. [Data 00][Data 01] Channel Data Transmission [j][v][ ][Set ID][ ][Data][Cr] Data 00 : High byte channel data Data 01 : Low byte channel data - 00 00 ~ 00 C7 (Decimal : 0 ~ 199) Data 02 : Input Source (Analog) - 00 : Antenna TV (ATV)
  • Page 22 EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable 2. Tune to the digital antenna (ATSC) channel 30-3. Set ID = All = 00 Data 00 : Physical Channel Number Data 00 = Don’t know Physical = 00 - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) Data 01 &...
  • Page 23 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) 2. Tune to the BS (ISDB-BS) channel 30. Set ID = All = 00 (Main Picture Input) Data 00 = Don’t know Physical = 00 ► To select input source for main picture. Data 01 &...
  • Page 24 EXTERNAL CONTROL DEVICE SETUP * [Data 02], [Data 03] functions depend on model 3) When [Data 00] is 06, 07 and signal. 00 : Off 01 : On * If [Data 00] is 00 (3D On), [Data 03] has no meaning.

Table of Contents