Table of Contents
Advertisement
receptacles. The green grounding lug extending from the adapter must be connected to a permanent
This appliance is for use on 230 Volts. For connecting three-blade grounding type plugs to three -slot
ground such as a properly grounded outlet box. The adapter should not be used if a three-slot grounded
receptacles. The green grounding lug extending from the adapter must be connected to a permanent
receptacle is available. To disconnect appliance, turn controls to OFF, then remove plug from outlet.
ground such as a properly grounded outlet box. The adapter should not be used if a three-slot grounded
receptacle is available. To disconnect appliance, turn controls to OFF, then remove plug from outlet.
WARNING:
Keep the front of the appliance through which the heat is radiated at least 1 meter away from furniture,
WARNING:
curtains and other flammable objects at all time. Never use an extension lead. The mains cable must
Keep the front of the appliance through which the heat is radiated at least 1 meter away from furniture,
ELECTRIC
remain at the back of the appliance and must not be in contact with any hot elements.
curtains and other flammable objects at all time. Never use an extension lead. The mains cable must
remain at the back of the appliance and must not be in contact with any hot elements.
INSTALLATIO N
WARNING: Find a safe location and build a suitable hole for fireplace. Minimum clearance from the ceiling and the mantel must be at
least 8 200mm; minimum clearance from the front must be at least 900mm. Choose a location near an outlet so an extension cord is
INSTALLATIO N
WARNING: Find a safe location and build a suitable hole for fireplace. Minimum clearance from the ceiling and the
not required.
mantel must be at least 8 200mm; minimum clearance from the front must be at least 900mm. Choose a location near an
WARNING: Find a safe location and build a suitable hole for fireplace. Minimum clearance from the ceiling and the
outlet so an extension cord is not required.
mantel must be at least 8 200mm; minimum clearance from the front must be at least 900mm. Choose a location near an
BEFORE INSTALLING THE IN-WALL FIREPLACE, PLEASE READ THE FOLLOWING STEPS CAREFULLY.
outlet so an extension cord is not required.
Before installing the in-wall fireplace, please read the following steps carefully.
WALL MOUNTED FIREPLACE STYLE
Before installing the in-wall fireplace, please read the following steps carefully.
WALL MOUNTED FIREPLACE STYLE
Remove the four silver colored screws on the top and take off the wall bracket (See Step 1),
Use the power drill to drill the wall (See Step 2),
WALL MOUNTED FIREPLACE STYLE
Remove the four silver colored screws on the top and take off the wall bracket (See Step 1), Use the power drill to drill the
Use screwdriver to put the screws into the wall together with the wall bracket (See Step 3).
wall (See Step 2), Use screwdriver to put the screws into the wall together with the wall bracket (See Step 3).
Remove the four silver colored screws on the top and take off the wall bracket (See Step 1), Use the power drill to drill the
wall (See Step 2), Use screwdriver to put the screws into the wall together with the wall bracket (See Step 3).
4x screw
4x screw
Lift fireplace and put it onto the bracket, then lock the pre 4 silver screws on the top. Take
Lift fireplace and put it onto the bracket, then lock the pre 4 silver screws on the top.
Lift fireplace and put it onto the bracket, then lock the pre 4 silver screws on the top. Take
off the 2 silver screws on the left side and right side.
Take off the 2 silver screws on the left side and right side.
off the 2 silver screws on the left side and right side.
Put the plastic tray, and put on the crystal and drift wood fire logs, then lift the glass panel onto the fireplace by 2 screws.
Put the plastic tray, and put on the crystal and drift wood fire logs, then lift the glass panel onto the fireplace by 2 screws.
Put the plastic tray, and put on the crystal and drift wood fire logs, then lift the glass panel onto the fireplace by 2 screws.
ESSED INSTALLATION
RECESSED INSTALLATION
odel BI 42 as an example. Prepare a wall with a framed opening of A: 1080mm wide and B: 420mm high. Make sure the
TAKE MODEL BI 42 AS AN EXAMPLE. Prepare a wall with a framed opening of A: 1080mm wide and B: 420mm high.
the wood block on both sides which used to fix the fireplace is 76mm. Make sure that the revealed wood block width
Make sure the width of the wood block on both sides which used to fix the fireplace is 76mm. Make sure that the revealed
sides is about 38mm after finishing the plasterboard. Measure the depth D from the plasterboard surface to the wood block
wood block width on both sides is about 38mm after finishing the plasterboard. Measure the depth D from the plasterboard
e it down.
surface to the wood block and write it down.
Manual_Electric_2021-UK-4.indd 5
Manual_Electric_2021-UK-4.indd 5
INSTALLATION
Wall bracket
Wall bracket
Connect bracket to wall
Connect bracket to wall
UK
23-05-2021 17:13
23-05-2021 17:13
Advertisement
Table of Contents
