Table of Contents
Advertisement
CARE AND MAINTENANCE
ELECTRIC
WARNING
ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing
maintenance, or moving this fireplace. Failure to do so could result in electric shock, fire, or personal injury.
NEVER IMMERSE IN WATER OR SPRAY WITH WATER.
Doing so could result in electric shock, fire, or personal injury.
CLEANING
Metal:
Buff using a soft cloth, slightly dampened with a citrus oil-based product.
DO NOT use brass polish or household cleaners as these products will damage the metal trim.
Glass:
Use a good quality glass cleaner sprayed onto the cloth or towel.
Dry thoroughly with a paper towel or lint-free cloth.
NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
Vents:
Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
Plastic:
Wipe gently with a slightly damp cloth and a mild solution of dish soap and warm water.
NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
!
CAUTION: SHARP EDGES!
1. After installation, the power plug should be accessible.
2. If the power cord is damaged. It must be replaced by the manufacturer or its service agent or a similarly qualified person
in order to avoid a hazard.
3. The heater must not be located immediately below a socket.
4. The appliance is not intended for use by young children or infirm persons. Young children should be supervised to ensure
that they do not play with the appliance.
5. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
6. In order to avoid overheating, do not cover the heater.
Manual_Electric_2021-UK-4.indd 12
Manual_Electric_2021-UK-4.indd 12
UK
23-05-2021 17:13
23-05-2021 17:13
Advertisement
Table of Contents
