Kubota GR1600-ID-2 Operator's Manual page 50

6. While lifting the mulching cover a little, move the
mulching cover forward and hook the rear of the cover
onto the deck.
Release the mower cover and discharge deflector
then place them on the stay of mulching cover.
(1) Discharge deflector
(2) Mower cover
(3) Mulching cover
(1) Discharge deflector
(2) Mower cover
(3) Mulching cover
(4) Stay of mulching cover
OPERATING THE MOWER
7. Almost fasten the clamp of the mulching cover, and
tighten the bolt with a hexagonal hole (M6) to 9.81 to
11.3 N-m (1.0 to 1.15 kgf-m).
Make sure the cover is fixed to the mower deck
securely with no gap for discharge.
(1) Mower deck
(2) Clamp
(3) Bolt with a hexagonal hole (M6)
To avoid serious injury:
A Do not operate the mower with the mulching
cover not certainly hooked.
29