Product Overview; Assembly And Adjust Height - Hiboy EQ1 User Manual

2. Product Overview

Handles
Upper Clamp
Stem
Deck
Lower Clamp
LED Wheel
Control Panel
Accelerator: Boost the scooter with your foot, then step (continuously) on the accelerator to start.
Rear brake: Step on the rear brake to slow down/stop.
Cover
Button
Footbrake Adjustable Stem
Motorized Wheel
Accelerator
2

3. Assembly and Adjust Height

Step 1. Slide the stem over the turning fork
and push it down until you hear a clear click.
Step 3. Place the handle in the groove and
close the cover then tighten the screw.
Make sure the stem is securely attached to
the turning fork before riding.
Step 2. Use the screw to tight the Upper and Lower Clamp
Step 4. Open the quick-realse lock, press the button into
the stem. Adjust height of the stem until it suits the height of the
3
rider. Then, close the quick-release lock.