Advertisement
Lithium Battery Safety Warnings
LITHIUM BATTERIES STORE A
LARGE AMOUNT OF ENERGY
AND WILL VENT FIRE OR
EXPLODE IF MISTREATED:
1. Keep Battery Pack dry.
Personal Safety
1. Follow all guidelines regarding
chemicals sprayed, including MSDS
instructions and EPA regulations.
2. Dress Properly - Do not wear loose clothing or
jewelry. They can be caught in moving parts.
Use of rubber gloves and substantial footwear
is recommended when working outdoors.
Wear protective hair covering to contain long hair.
3.
Wear ANSI-approved safety goggles
and heavy-duty work gloves. Use face
or dust mask if operation is dusty.
Gardening Appliance Use and Care
1. Avoid Dangerous Environment -
Do not use appliances in damp or wet locations.
2. Do not Use In Rain.
3. Keep Children Away - All visitors should
be kept at a distance from work area.
4. When servicing use only identical
replacement parts.
5. Use Right Appliance - Do not use appliance for
any job except that for which it is intended.
6. Do not Force Appliance - It will do the job
better and with less likelihood of injury at
the rate for which it was designed.
7. Store Idle Appliances Indoors - When not in use,
appliances should be stored indoors in dry, and
high or locked-up place - out of reach of children.
Item 58671
For technical questions, please call 1-888-866-5797.
2. DO NOT DO ANY OF THE FOLLOWING
TO THE BATTERY PACK:
a. Open,
b. Drop,
c. Short-circuit,
d. Puncture,
e. Incinerate, or
f. Expose to temperatures greater than 265°F.
3. Charge Battery Pack only according
to its Charger's instructions.
4. Inspect Battery Pack before every use;
do not use or charge if damaged.
4. Avoid Unintentional Starting - Do not carry
plugged-in appliance with finger on switch.
Be sure switch is off when plugging in.
5. Do not Overreach -
Keep proper footing and balance at all times.
6. Stay Alert - Watch what you are doing.
Use common sense. Do not operate
appliance when you are tired.
8. Check Damaged Parts - Before further use
of the appliance, a guard or other part that
is damaged should be carefully checked to
determine that it will operate properly and perform
its intended function. Check for alignment
of moving parts, binding of moving parts,
breakage of parts, mounting, and any other
condition that may affect its operation. A guard
or other part that is damaged should be properly
repaired or replaced by a qualified technician
unless indicated elsewhere in this manual.
Page 3
Advertisement
