JVC PD-42B50BU, PD-35B50BU, PD-42B50BJ, PD-35B50BJ Instructions Manual page 12

Setting up your TV
5 Press the blue button to start the
AUTO PROGRAM function
The AUTO PROGRAM menu appears
and received TV channels are
automatically stored in the programme
numbers (PR).
>> AUTO PROGRAM
14%
OK
D0004-EN
• Perform the "ACI function" operation
(see page 11) when "ACI START/ACI
SKIP" is displayed.
• To cancel the AUTO PROGRAM
function:
Press the b button.
After the TV channels have been
registered in the programme
numbers (PR), the EDIT menu
appears
> EDIT
PR
AV
01
02
03
04
05
06
07
08
09
OK
D0038-EN
• If you want to, you can now edit the
programme numbers (PR) using the
EDIT/MANUAL function. For details,
see "EDIT/MANUAL" on page 38.
• If you do not want to edit programme
numbers (PR), go to the next step.
10
CH 28
ID CH/CC
32
CH/CC
BBC1 CH/CC 31
CH/CC 31
ID MANUAL
MOVE
INSERT DELETE
6 Press the a button to display the
T-V LINK menu
T-V LINK
DOWNLOAD TV VCR
OK
EXIT
D0005-EN
If you do not have a T-V LINK
compatible VCR connected:
Press the b button to exit the T-V LINK
menu.
The T-V LINK menu disappears.
If you have a T-V LINK compatible
VCR connected to the EXT-2
terminal:
Follow the operating procedure
"Downloading the data to VCR" on
page 11 to transmit the Programme
number (PR) data.
Now, the initial settings are complete,
and you can watch the TV
• When the COUNTRY setting is
UNITED KINGDOM:
BBC1, BBC2, ITV, Channel 4 and
Channel 5 are automatically set to the
programme numbers PR1 to PR5. If the
TV doesn't receive one of these TV
channels, that programme number (PR)
will not be set. Programme number PR6 is
not normally set.
• When the COUNTRY setting is not
UNITED KINGDOM:
If your TV can detect the TV channel
name from the TV channel broadcast
signal, the TV channel name is assigned
to the programme number (PR) to which
the TV channel has been set. However,
which TV channels are set to which
programme numbers (PR) will depend on
the area in which you live.
• If a TV channel you want to view is not
set to a programme number (PR), you can
set it using the MANUAL function. For
details, see "EDIT/MANUAL" on
page 38.