3. Current State
1) Activate "Operation Button Guide ①" by pressing any one of operation buttons
(A–C).
2) Press the "MENU" button.
3) Select "CURRENT STATE" on MENU 1/2 and press the "OK" button.
And then, OSD "CURRENT STATE" appears.
Current luminance
Current ambient Light
Current color
Current input source
Configuration number
Luminance setting
Gamma setting
Color setting
4. DICOM conformance test
1) Activate "Operation Button Guide ①" by pressing any one of operation buttons
(A–C).
2) Press the "MENU" button.
3) Select "DICOM CONFORMANCE TEST" on MENU 1/2 and press the "OK" button.
And then, the following OSD "DICOM CONFORMANCE TEST" appears as below.
Test result
Maximum deviation
Luminance status
Continuous lighting time
of the backlight
CURRENT STATE
C U R R E N T
S T A T E
L U M I N A N C E
:
A M B
L I G H T
:
C O L O R
:
I N P U T
:
C A L I B R A T I O N
S E T T I N G
C O N F I G
:
L U M I N A N C E
:
G A M M A
:
C O L O R
:
DICOM CONFORMANCE TEST
D I C O M
C O N F O R M A N C E
R E S U L T
M A X
D E V I A T I O N
L U M I N A N C E
E L A P S E D
T I M E
S T A R T
T E S T I N G
Y e s
> N o
- 11 -
4 0 9
1 0 0 . 0 lx
7 5 0 0 K
( x = 0 . 3 0 0
y = 0 . 3 1 5 )
D V I
1
4 1 0
/
0 . 6
D I C O M
G S D F
7 5 0 0 K
( x = 0 . 2 9 9
y = 0 . 3 1 5 )
T E S T
:
P a s s e d
:
4 . 5
%
:
S t a b l e
:
1 2 3 m i n
5 M P
5 M P