Table of Contents
Advertisement
EN
U s e
Maintenance
HANDLING ELEMENTS
2
Hot plate selection touch keys.
**Power and/or residual heat
displays.
"Decrease" power touch key.
"Increase" power touch key.
Double burner selection touch key
(double hot plate).
Locking touch key for the rest of
touch keys.
**Hot plate double zone indicatior
(only next to double burner hot
plates).
**Lock icon.
Timer touch key.
**Timer display
The timed cooking surface indicator
* Depending on model
** Only visible while running.
The manoeuvres are done by means
of the touch keys. You do not need
to exert force on the desired touch
key, you only need to touch it with
function.
SWITCHING ON THE DEVICE
time, it will be locked and the related
touch locking touch key
1 Touch the switching on touch key
(1) for at least one second.
The Touch Control is activated and a 0
appears with 50% brightness on all
the power displays (3).
If any zone has residual heat indication
before switch on ,the display continue
s showing ''H'' instead of 0.
30
a n d
If you do not take any action in the next
10 seconds the touch control will
SWITCHING ON A HOT PLATE
Once the Touch Control has been
activated by means of the touch key
(1), the power indicators of the hot
plates will display a 0 (3).
1 Press the touch key for the selected
hot plate (2). The related power
indicator ( 3 ) will be activated
and brightness of indicator will
increase.
2 Using the touch key
choose the desired power level.
The
and
repetitive, so if you keep them pressed
they increase or decrease with a 0.5
second interval.
Only one hot plate can be selected at
the same time
Warning:
Once you have selected the
hot plate, press the touch key
once. The hot plate will be activated at
full power.
SWITCHING OFF THE HOT PLATE
1 The hot plate must previously be
selected.
(7) until the
2 Using the touch key
the power level to 0.
sensor for 2 seconds, the related zone
ii) When you press touch keys
(4/5) simultaneously, the hot plate
RESIDUAL HEAT INDICATOR
The power indicator of the hot plate will
or
(4/5),
display an H when the glass surface
reaches a temperature that could
cause burning.
touch keys are
When this risk disappears,
is in stand by),
ii) or displays 0 (if the appliance is
still running).
(4)
(4), lower
Warning:
Warning:
and
Advertisement
Table of Contents
