Advertisement
U-UDS5000WC Drawing Table Assembly Instructions
D
7
5
1
B
FIG 1
FIG 2
IMPORTANT: ASSEMBLY IS EASIER AND SAFER WITH TWO PEOPLE
8
4444 Lawton Avenue, Detroit, MI 48208 USA • Tel:(313)895-0700/Fax:(313)895-0709
Email: Custservmud@aol.com • visit us at www.MartinUniversalDesign.com
STEP 1] Assembly Base of Table
Begin by taking the [2] Lower Base Feet (part B)
and attach the foot rest (part C) to the Lower Base
Feet using [2] M4 x 12mm screws (part 1). Secure
by tightening screws. See FIG 1.
5
Continue by sliding the H-Frame (part D) down
into the sides of the Lower Base Feet (part B).
Secure with large washer (part 7) and Knob (part
1
5). Tighten Knob to secure.
Complete Step 1 by inserting [4] Threaded Rubber
B
Feet (part 8) into the bottom of the base.
See FIG 1.
C
8
STEP 2] Hinges to Base Assembly
Attach [3] Hinges (part 9) to the top edge of the
H-Frame (part D) by using [2] M4 x 12mm screws
in each hinge as shown in FIG 2.
Secure to H-Frame with Phillips screw-driver.
Pg. 2
Advertisement
