DeLonghi AN Series Instructions For Use Manual page 10

• Select the fan speed by touching the
You can choose:
Minimum speed: for quiet operation.
Medium speed: reduces noise level while maintain-
ing a comfortable temperature.
Maximum speed: to achieve the target tempera-
ture as rapidly as possible.
the appliance automatically selects the
most suitable fan speed in relation to the temperature set and
current room temperature.
The most suitable temperature for the room during the summer
varies from 75°F to 81°F (24 to 27°C). You are recommended, how-
ever, not to set a temperature much below the outdoor temperature.
ARCTIC WHISPER (available in air c onditioning mode only)
)
By activating this function, the operating noise is further re-
duced. To activate it, touch the
The display shows he corresponding symbol (C16).
DEHUMIDIFYING MODE
Ideal to reduce room humidity (spring and autumn, damp
rooms, rainy periods, etc). In dehumidifying mode, the appli-
ance MUST be set-up in the same way as for air conditioning,
with the air exhaust hose (B2) attached to enable the moisture
to be discharged outside. To set this mode:
• Touch repeatedly the MODE button until the dehumidfying
symbol (C11) is displayed.
FAN MODE
When using the appliance in this mode, the air exhaust hose
(B2) does not need to be connected.
To set this mode:
Touch repeatedly the MODE button until the fan symbol is
•
displayed.
• Select the fan speed by touching the
You can choose:
button (C6).
(C7) button.
button (C6).
Minimum speed: for quiet operation.
Medium speed: reduces noise level but still main-
tains a good level of comfort.
Maximum speed: for maximum fan power.
CHANGING TEMPERATURE SCALE
The temperature can be displayed in °F or °C. To change the tem-
perature scale, turn off the unit by touching the
press and hold the MODE button for approximately 20 seconds.
The appliance emits a sound to confirm.
SETTING THE TIMER
The timer can be used to delay appliance start up or shutdown.
This avoids wasting electricity by not operating the appliance
when it is not needed.
How to program delayed start up
• Plug the appliance into the outlet and turn the unit to
standby.
• Touch the timer button (C3): the timer symbol (C13) and
the number of hours come on.
• Use the + (C4) or - (C5) buttons to set the number of hours
delay before the appliance comes on.
• A few seconds after, the setting is memorized, the timer
symbol is lit. and the display shows that the appliance is in
standby.
The appliance will restart using the mode previously set.
The appliance can be set to come on within the next 24 hours.
To delete the setting, touch two times the timer button (C3). The
timer symbol (C13) switches off.
How to program delayed shutdown
• With the air conditioner on, in any mode, it is possible to set
the delayed shutdown.
• Touch the Timer (C3) button: the timer symbol (C13) and
the hours switch on.
Use the + (C4) or - (C5) buttons to set the number of hours
•
delay before the appliance turns off.
• A few seconds after, the setting is memorized, the timer
symbol is lit and the display shows the current mode.
At the end of the set time the appliance automatically turns to
standby mode. To delete the timer setting, touch the timer but-
ton twice (C3). The timer symbol (C13) switches off.
10
button, then