Nemaxx PW18 Instruction Manual page 23

FLAME POWER VARIATION
Depending on the heating desire, fuel intake quantity can be adjusted from few to large by the fuel intake But-
ton. For example, pressing the key the feed quantity can be changed, the display shows the selected
power.
MINIMUM POWER P4
MEDIUM POWER P2
ECO STAGE
If the room temperature exceeds the set-out temperature, automatically the stove is stopped Eco1 or turns to
minimum power in order to save energy Eco2, It shows like following:
After the room temperature drops down, and below the set-out temperature (3 degrees), it automatically,
switching on again or come back to the previous Power level. Later how to select these two functions will be
shown.
AUTOMATIC AND MANUAL SELECTING
Pressing the keys , The light shown on the following, will be on/off.
If the light is on, it shows that automatic program is selected. Otherwise it is manual.
DESIRED TEMPERATURE SETTING
Pressing the keys , on the display the temperature is selecting.
LOW POWER P3
MAXIMUM POWER P1
[ EN ● 23 ]
Version: 2.0
KEN002PW18 25.11.2019